|
EN-3218-007
|
2006
|
Aerospace series-Connectors,rectangular, with metallic shells and screw-locking -Part 007: Plug with
|
|
EN-3218-008
|
2006
|
Aerospace series-Connectors,rectangular, with metallic shells and screw-locking —
Part 008: Recepta
|
|
EN-3218-009
|
2006
|
Aerospace series-Connectors, rectangular, with metallic shells and screw-locking —
Part 009: Protec
|
|
EN-3218-010
|
2006
|
Aerospace series-Connectors,rectangular, with metallic shells and screw-locking Part 010: Protective
|
|
EN-3218-011
|
2006
|
Aerospace series-Connectors,rectangular, with metallic shells and screw-locking Part 011: Tool, inse
|
|
EN-3230
|
2001
|
Aerospace Series - Nuts, Hexagon, Slotted/Castellated, Reduced Height, Normal Across Flats, In Steel
|
|
EN-3243
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Ferrule, Welded, with Dynamic Beam Seal End (S)
|
|
EN-3244
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Unions, Double Ended (S)
|
|
EN-3245
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Unions, Reducer (S)
|
|
EN-3246
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Unions, Bulkhead (S)
|
|
EN-3248
|
2001
|
Aerospace Series - Pipe Coupling 8 Degrees 30' in Titanium Alloy - Adaptors, Reduced Pipe End, with
|
|
EN-325
|
1993
|
Wood-Based Panels - Determination of Dimensions of Test Pieces (R)
|
|
EN-326-2
|
2000
|
Corr 1 Wood-Based Panels - Sampling, Cutting and Inspection - Part 2: Quality Control in the Factory
|
|
EN-326-3
|
1998
|
Wood-Based Panels - Sampling, Cutting and Inspection Part 3: Inspection of a Consignment of Panels (
|
|
EN-3264
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Thrust Wire Nut (S)
|
|
EN-3266
|
2001
|
Pipe Coupling in Titanium Alloy - Bulkhead Nut (S)
|
|
EN-3267
|
2001
|
Washers, Bulkhead in Titanium Alloy (S)
|
|
EN-3268
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Pressure Plug (S)
|
|
EN-327
|
2000
|
Heat Exchangers - Forced Convection Air Cooled Refrigerant Condensors - Test Procedure for Establish
|
|
EN-3270
|
2001
|
Pipe Coupling 8 Degrees 30' in Titanium Alloy - Blanking Plugs with Lockring (S)
|
|
EN-3272
|
2001
|
Pipe Coupling 8 Degrees 30' - Dynamic Beam Seal End for Ferrule, Welded - Geometric Configuration (S
|
|
EN-3273
|
2001
|
Pipe Coupling 8 Degrees 30' - Dynamic Beam Seal End for Elbows, Tees and Crosses - Geometric Configu
|
|
EN-3275
|
2002
|
Pipe Coupling 8 Degrees 30' up to 28 000 kPa - Dynamic Beam Seal - Metric Series - Technical Specifi
|
|
EN-328
|
1999
|
Heat Exchangers - Test Procedures for Establishing the Performance of Forced Convection Unit Air Coo
|
|
EN-3280
|
1994
|
Bearings, Airframe Rolling, Rigid or Self-Aligning - Technical Specification (S)
|
|
EN-3298
|
1998
|
Inserts, Thin Wall, Self-Locking - Installation and Removal Procedure (S)
|
|
EN-33
|
1999
|
Pedestal W.C. Pans with Close-Coupled Flushing Cistern - Connecting Dimensions Together with BS EN 3
|
|
EN-3-3
|
1996
|
Portable Fire Extinguishers Part 3: Construction, Resistance to Pressure, Mechanical Tests (N)
|
|
EN-331
|
1998
|
Manually Operated Ball Valves and Closed Bottom Taper Plug Valves for Gas Installations in Buildings
|
|
EN-3332
|
2006
|
Aerospace series ? Aluminium alloy AL-P7475-T762 ? Clad sheet and strip ? 1,0 mm ? a ? 6 mm;German a
|
|
EN-3333
|
2006
|
Aerospace series ? Aluminium alloy AL-P7475-T762 ? Sheet and strip ? 0,6 mm ? a ? 6 mm;German and En
|
|
EN-3335
|
2006
|
Aerospace series ? Aluminium alloy AL-P7475-O2 ? Sheet for superplastic forming (SPF) ? 0,8 mm ? a ?
|
|
EN-3338
|
2006
|
Aerospace series-Aluminium alloy AL-P7050-T74511-Extruded bar and section – a or D ? 150 mm with per
|
|
EN-334
|
2005
|
Gas Pressure Regulators for Inlet Pressures up to 100 Bar
|
|
EN-3341
|
2006
|
Aerospace series ? Aluminium alloy AL-P6061-T4 or T42 ? Sheet and strip ? 0,4 mm ? a ? 6 mm;German a
|
|
EN-3342
|
2006
|
Aerospace series ? Aluminium alloy AL-P6061-T4 or T42 ? Drawn or extruded bar and section ? a or D ?
|
|
EN-3344
|
2006
|
Aerospace series ? Aluminium alloy AL-P7050-T76511 ? Extruded bar and section ? a or D ? 150 mm with
|
|
EN-3347
|
2006
|
Aerospace series ? Aluminium alloy AL-P2024-T8511 ? Extruded bar and section ? a or D ? 150 mm with
|
|
EN-335-1
|
1992
|
Hazard Classes of Wood and Wood-Based Products Against Biological Attack Part 1: Classification of H
|
|
EN-335-2
|
1992
|
Hazard Classes of Wood and Wood-Based Products Against Biological Attack Part 2: Guide to the Applic
|
|
EN-335-3
|
1996
|
Durability of Wood and Wood-Based Products - Definition of Hazard Classes of Biological Attack Part
|
|
EN-338
|
1995
|
Structural Timber - Strength Classes (Partially Replaces BS 5268: Part 2: 1991) (V)
|
|
EN-3381
|
1997
|
Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Close Tolerance Normal Shank, S
|
|
EN-3-4
|
1996
|
Portable Fire Extinguishers Part 4: Charges, Minimum Required Fire (N)
|
|
EN-341
|
1993
|
Amd 1 Personal Protective Equipment Against Falls From a Height - Descender Devices AMD 9423 March 1
|
|
EN-3425
|
2006
|
Groove dimensions for axial mounting external type retaining rings
|
|
EN-3426
|
2006
|
Groove dimensions for axial mouting external type retaining rings
|
|
EN-3427
|
2006
|
Groove dimensions for radial mounting retaining rings
|
|
EN-344
|
1993
|
Amd 2 Safety, Protective and Occupational Footwear for Professional Use Part 1: Requirements and Tes
|
|
EN-344-1
|
1993
|
Safety, Protective and Occupational Footwear for Professional Use Part 1: Requirements and Test Meth
|
